Wall Mount Installation Guide
Components of Kit :
M3 x .5 - 10 mm Flat Head Phillips Screw
M3 x .5 - 8 mm Flat Head Phillips Screw
#7 x 1.00" FHP Wood Screw
7580 Wall Mount Installation Guide
Adapter Kit Installation –
1. Remove the rubber feet on the bottom of the 7580.
2. Attach the adapter plate to the bottom of the unit with the four
M3 x .5 x 10 mm screws () provided in the kit.
3. Attach the base plate to the adapter plate with the four M3 x .5 x 8 mm
screws () provided in the kit.
4. Before mounting the locking plate, consider the position the unit will rest when fully installed. There are two tabs located on the locking plate.